The Foundation of the Aviation Industry in Manitoba - Revision history

Rbernier at 20:38, 20 November 2017

2017-11-20T20:38:27Z

Abrawerman at 19:29, 30 July 2014

2014-07-30T19:29:52Z

← Older revision		Revision as of 14:29, 30 July 2014
Line 51:		Line 51:
	\|		\|
	Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.		Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.

			{{#ev:youtube\|VUW4WJ-3uyY}}

	\|}		\|}

Wattsa at 15:01, 3 October 2013

2013-10-03T15:01:48Z

← Older revision		Revision as of 10:01, 3 October 2013
Line 5:		Line 5:


	= The ~~Begginings~~ =		= The Beginnings =
	The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.		The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.
	[[File:Richardson_ja.jpg \|frame\|right\|250px\|x250px\|J.A. Richardson]]		[[File:Richardson_ja.jpg \|frame\|right\|250px\|x250px\|J.A. Richardson]]

Abrawerman at 12:36, 3 October 2013

2013-10-03T12:36:22Z

← Older revision		Revision as of 07:36, 3 October 2013
Line 1:		Line 1:
			==Introduction==
	As a means of celebrating the role of engineering and geoscience in the development of Manitoba and APEGM's history, the Heritage Committee created a series of articles that link water to the economic and social development of the province. This article, while somewhat linked to water, deals with the development of the aviation industry in Manitoba. In particular, looks at the formation of an aviation company that is known today as Magellan Aerospace.		As a means of celebrating the role of engineering and geoscience in the development of Manitoba and APEGM's history, the Heritage Committee created a series of articles that link water to the economic and social development of the province. This article, while somewhat linked to water, deals with the development of the aviation industry in Manitoba. In particular, looks at the formation of an aviation company that is known today as Magellan Aerospace.

Line 4:		Line 5:


			= The Begginings =
	The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.		The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.
	[[File:Richardson_ja.jpg \|frame\|right\|250px\|x250px\|J.A. Richardson]]		[[File:Richardson_ja.jpg \|frame\|right\|250px\|x250px\|J.A. Richardson]]
Line 59:		Line 61:


			= Standard Aero Engine Works=
	The need for aircraft maintenance also gave rise to the creation of Standard Aero Engine Works in 1938. This was an offshoot of the Standard Machine Works founded by Charles Pearce and William Bucknell in Winnipeg in 1911. Like the MacDonald brothers, they started to repair and overhaul aircraft engines in the late 1920s. Today it is known as StandardAero. As the company steadily grew so to did its reputation and nowadays has a worldwide presence in the aviation industry. Today it is the world's largest independent small turbine engine repair and overhaul company. StandardAero also operates facilities in the United States, Europe and Asia as well as in Winnipeg.		The need for aircraft maintenance also gave rise to the creation of Standard Aero Engine Works in 1938. This was an offshoot of the Standard Machine Works founded by Charles Pearce and William Bucknell in Winnipeg in 1911. Like the MacDonald brothers, they started to repair and overhaul aircraft engines in the late 1920s. Today it is known as StandardAero. As the company steadily grew so to did its reputation and nowadays has a worldwide presence in the aviation industry. Today it is the world's largest independent small turbine engine repair and overhaul company. StandardAero also operates facilities in the United States, Europe and Asia as well as in Winnipeg.

Line 65:		Line 68:


			= Current Aviation Industry in Manitoba =
	From these humble beginnings the aviation industry has grown dramatically. In 2010 Manitoba based aerospace industry revenues exceeded $1.6 billion employing an estimated 5,300 persons. They work on aerospace manufacturing and repair & overhaul which accounts for approximately 80% of industry revenues with aerospace training and services providing 20%.		From these humble beginnings the aviation industry has grown dramatically. In 2010 Manitoba based aerospace industry revenues exceeded $1.6 billion employing an estimated 5,300 persons. They work on aerospace manufacturing and repair & overhaul which accounts for approximately 80% of industry revenues with aerospace training and services providing 20%.


	Today the Manitoba aviation industry is led by four world-class firms -- Boeing Technology Canada, StandardAero, Magellan Aerospace Limited – Winnipeg, and Aveos Fleet Performance Inc. However, there are 23 other established regional and national firms as well. These companies are supported by a large number of small to medium sized aerospace suppliers including precision machine shops, tool and die makers, precision sheet metal fabricators, plating and coating operations, and electronics companies.		Today the Manitoba aviation industry is led by four world-class firms -- Boeing Technology Canada, StandardAero, Magellan Aerospace Limited – Winnipeg, and Aveos Fleet Performance Inc. However, there are 23 other established regional and national firms as well. These companies are supported by a large number of small to medium sized aerospace suppliers including precision machine shops, tool and die makers, precision sheet metal fabricators, plating and coating operations, and electronics companies.

Abrawerman at 12:34, 3 October 2013

2013-10-03T12:34:11Z

← Older revision		Revision as of 07:34, 3 October 2013
Line 18:		Line 18:
	He quit to enlist as an infantryman in the Canadian Army. While in Europe he transferred to the Royal Flying Corps. Punch became a bomber pilot and emerged from the war as a skilled and able pilot. Leaving the military for civil aviation, he was one of the first pilots to join Western Canadian Airways, operating in Manitoba and Northern Ontario. He flew the first aircraft on the prairie airmail circuit of Winnipeg, Regina, Calgary, Edmonton, Saskatoon, and Winnipeg.		He quit to enlist as an infantryman in the Canadian Army. While in Europe he transferred to the Royal Flying Corps. Punch became a bomber pilot and emerged from the war as a skilled and able pilot. Leaving the military for civil aviation, he was one of the first pilots to join Western Canadian Airways, operating in Manitoba and Northern Ontario. He flew the first aircraft on the prairie airmail circuit of Winnipeg, Regina, Calgary, Edmonton, Saskatoon, and Winnipeg.

			\|}

	\|}
	It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.		It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.

Line 31:		Line 31:
	{\| class="wikitable"		{\| class="wikitable"
	\|-		\|-
	! '''The Fokker Aircraft Company of America'''\|-		! '''The Fokker Aircraft Company of America'''
			\|-
	\| In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.		\| In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.
	\|}		\|}

	[[File:Fokker_Universal.jpg \|frame\|right\|300px\|x300px\|Fokker Universal]]		[[File:Fokker_Universal.jpg \|frame\|right\|300px\|x300px\|Fokker Universal]]

Line 43:		Line 45:
	{\| class="wikitable"		{\| class="wikitable"
	\|-		\|-
	! '''The Noorduyn Norseman '''\|-		! '''The Noorduyn Norseman '''
			\|-
	\|		\|
	Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.		Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.

Abrawerman at 12:33, 3 October 2013

2013-10-03T12:33:17Z

← Older revision		Revision as of 07:33, 3 October 2013
Line 29:		Line 29:
	The largest US manufacturer of floats for aircraft was Edo Aircraft (which became EDO Corporation in 1947). The founder, Earl D Osborn, established it in 1925. Osborn wanted to find a manufacturing outlet in Canada. He knew the Western Canadian Airlines pilots and operators and, the story goes, sought their advice as to which company they would recommend. The reply seems to have been that he should not deal with anyone but Grant MacDonald in Winnipeg. MacDonald was invited to College Point, NY (today a suburb of Brooklyn) and they became fast friends. So MacDonald brothers became the Edo Licensee in Canada (see panel).		The largest US manufacturer of floats for aircraft was Edo Aircraft (which became EDO Corporation in 1947). The founder, Earl D Osborn, established it in 1925. Osborn wanted to find a manufacturing outlet in Canada. He knew the Western Canadian Airlines pilots and operators and, the story goes, sought their advice as to which company they would recommend. The reply seems to have been that he should not deal with anyone but Grant MacDonald in Winnipeg. MacDonald was invited to College Point, NY (today a suburb of Brooklyn) and they became fast friends. So MacDonald brothers became the Edo Licensee in Canada (see panel).

	:'''The Fokker Aircraft Company of America'''		{\| class="wikitable"
	:In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.		\|-
			! '''The Fokker Aircraft Company of America'''\|-
			\| In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.
			\|}
	[[File:Fokker_Universal.jpg \|frame\|right\|300px\|x300px\|Fokker Universal]]		[[File:Fokker_Universal.jpg \|frame\|right\|300px\|x300px\|Fokker Universal]]

Line 39:		Line 41:
	For the fledgling company the early years were difficult. The depression of the 1930s meant fewer aircraft were flying and being built, therefore, fewer floats and repairs were needed. The factory produced a variety of floats (as well as Edo, Fairchild and Junkers floats were constructed) but still the work was seasonal. The workforce would fluctuate between as few as 2 and as many 20. Because of cash flow problems aircraft repair would only be done just before the flying season. The bulk of the work would be in the late winter, spring and early summer and involve a lot of overtime to enable the aircraft to be available after the spring thaw. It many years for aircraft repair to become an even workload. By then the work included the first overhaul of a Fokker Aircraft. This work provided for steady growth of the workforce, which had reached 65 employees in 1936.		For the fledgling company the early years were difficult. The depression of the 1930s meant fewer aircraft were flying and being built, therefore, fewer floats and repairs were needed. The factory produced a variety of floats (as well as Edo, Fairchild and Junkers floats were constructed) but still the work was seasonal. The workforce would fluctuate between as few as 2 and as many 20. Because of cash flow problems aircraft repair would only be done just before the flying season. The bulk of the work would be in the late winter, spring and early summer and involve a lot of overtime to enable the aircraft to be available after the spring thaw. It many years for aircraft repair to become an even workload. By then the work included the first overhaul of a Fokker Aircraft. This work provided for steady growth of the workforce, which had reached 65 employees in 1936.

	:'''The Noorduyn Norseman '''		{\| class="wikitable"
	:Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.		\|-
			! '''The Noorduyn Norseman '''\|-
			\|
			Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.

			\|}
	[[File:Noorduyn_Norseman.jpg \|frame\|right\|300px\|x300px\|Noorduyn Norseman]]		[[File:Noorduyn_Norseman.jpg \|frame\|right\|300px\|x300px\|Noorduyn Norseman]]

Abrawerman at 12:30, 3 October 2013

2013-10-03T12:30:18Z

← Older revision		Revision as of 07:30, 3 October 2013
Line 22:		Line 22:
	It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.		It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.

	[[File:Punch_Dickins.jpg \|300px\|right\| Punch Dickins]]		[[File:Punch_Dickins.jpg \|frame\|300px\|x300px\|right\| Punch Dickins]]

	The MacDonald Brothers story starts in 1904. This was the year the three MacDonald brothers left Nova Scotia for the Prairies. Two of them, Grant and his brother James arrived on a harvesters’ excursion train to farm near Portage la Prairie. Obviously farming didn’t really suit the brothers as in 1906, with the third brother Edwin, they formed the MacDonald Brothers Sheet Metal and Roofing Company. The company prospered and was still operating in Winnipeg as late as 1980.		The MacDonald Brothers story starts in 1904. This was the year the three MacDonald brothers left Nova Scotia for the Prairies. Two of them, Grant and his brother James arrived on a harvesters’ excursion train to farm near Portage la Prairie. Obviously farming didn’t really suit the brothers as in 1906, with the third brother Edwin, they formed the MacDonald Brothers Sheet Metal and Roofing Company. The company prospered and was still operating in Winnipeg as late as 1980.
Line 32:		Line 32:
	:In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.		:In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.

	[[File:Fokker_Universal.jpg \|\|right\|~~400px~~\|Fokker Universal]]		[[File:Fokker_Universal.jpg \|frame\|right\|300px\|x300px\|Fokker Universal]]

	The MacDonalds decided to separate the aircraft business from the sheet metal shop, so in 1930 MacDonald Brothers Aircraft Limited was formed. The new shop was on Robinson Street in Winnipeg’s North End. They also had some space at the Brandon Avenue base for fitting and installing repaired components. It was the beginning of an operation that would manufacture floats for aircraft of Western Canada Airways and become one of the world’s largest manufacturers of seaplane floats.		The MacDonalds decided to separate the aircraft business from the sheet metal shop, so in 1930 MacDonald Brothers Aircraft Limited was formed. The new shop was on Robinson Street in Winnipeg’s North End. They also had some space at the Brandon Avenue base for fitting and installing repaired components. It was the beginning of an operation that would manufacture floats for aircraft of Western Canada Airways and become one of the world’s largest manufacturers of seaplane floats.
Line 42:		Line 42:
	:Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.		:Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.

	[[File:Noorduyn_Norseman.jpg \|right\|~~500px~~\|Noorduyn Norseman]]		[[File:Noorduyn_Norseman.jpg \|frame\|right\|300px\|x300px\|Noorduyn Norseman]]

	In these pre World War II days MacDonald Brothers also started a relationship with the Royal Canadian Air Force (RCAF) which was to be the foundation for the massive expansion in the war effort that followed. Pre-1936 the RCAF was responsible for overseeing the airworthiness of all aircraft both military and civilian. Hence a close liaison developed between the RCAF inspectors and MacDonald brothers. The plant overhauled RCAF Avro Avian and the ubiquitous Tiger Moth.		In these pre World War II days MacDonald Brothers also started a relationship with the Royal Canadian Air Force (RCAF) which was to be the foundation for the massive expansion in the war effort that followed. Pre-1936 the RCAF was responsible for overseeing the airworthiness of all aircraft both military and civilian. Hence a close liaison developed between the RCAF inspectors and MacDonald brothers. The plant overhauled RCAF Avro Avian and the ubiquitous Tiger Moth.

Abrawerman at 12:28, 3 October 2013

2013-10-03T12:28:55Z

← Older revision		Revision as of 07:28, 3 October 2013
Line 3:		Line 3:
	You could say the development of an aviation industry occurred by happenstance. Two things came together. First, a gold strike in the 1920’s was made at Red Lake, Ontario northwest of Dryden. With no roads, aircraft became the best means of access. Water was the preferred surface with aircraft on floats in the “open season” and skis when the Lake was frozen. The demand for air service spurred the rise of commercial aviation in Manitoba and North Western Ontario. The second was the hobby and interest in those early aircraft and their pilots of one Winnipeg based entrepreneur.		You could say the development of an aviation industry occurred by happenstance. Two things came together. First, a gold strike in the 1920’s was made at Red Lake, Ontario northwest of Dryden. With no roads, aircraft became the best means of access. Water was the preferred surface with aircraft on floats in the “open season” and skis when the Lake was frozen. The demand for air service spurred the rise of commercial aviation in Manitoba and North Western Ontario. The second was the hobby and interest in those early aircraft and their pilots of one Winnipeg based entrepreneur.


	The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.		The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.
	[[File:Richardson_ja.jpg \|frame\|right\|~~200px~~\|J.A. Richardson]]		[[File:Richardson_ja.jpg \|frame\|right\|250px\|x250px\|J.A. Richardson]]

	Back in 1926 Richardson found that the most suitable aircraft for the type of work was the Fokker Universal, as it was readily convertible from wheels to skis and to floats in the open-water season. These aircraft were flown by an assortment of pilots who became legendary bush pilots. Punch Dickins (see panel), Wop May, Ray Brown and others were opening up new routes and from time to time damaging their machines. Winnipeg was the closest city and the float planes would land on the Red River at the Brandon Avenue base. (in 2011 it is the site of the Redboine Boat Club). One of the regular visitors to watch the aircraft and talk to the pilots at Brandon Avenue was Grant MacDonald.		Back in 1926 Richardson found that the most suitable aircraft for the type of work was the Fokker Universal, as it was readily convertible from wheels to skis and to floats in the open-water season. These aircraft were flown by an assortment of pilots who became legendary bush pilots. Punch Dickins (see panel), Wop May, Ray Brown and others were opening up new routes and from time to time damaging their machines. Winnipeg was the closest city and the float planes would land on the Red River at the Brandon Avenue base. (in 2011 it is the site of the Redboine Boat Club). One of the regular visitors to watch the aircraft and talk to the pilots at Brandon Avenue was Grant MacDonald.

Abrawerman at 11:42, 10 September 2013

2013-09-10T11:42:44Z

← Older revision		Revision as of 06:42, 10 September 2013
Line 1:		Line 1:
	As a means of celebrating the role of engineering and geoscience in the development of Manitoba and APEGM's history, the Heritage Committee created a series of articles that link water to the economic and social development of the province. This article, while somewhat linked to water, deals with the development of the aviation industry in Manitoba. In particular, looks at the formation of an aviation company that is known today as Magellan Aerospace.		As a means of celebrating the role of engineering and geoscience in the development of Manitoba and APEGM's history, the Heritage Committee created a series of articles that link water to the economic and social development of the province. This article, while somewhat linked to water, deals with the development of the aviation industry in Manitoba. In particular, looks at the formation of an aviation company that is known today as Magellan Aerospace.


	You could say the development of an aviation industry occurred by happenstance. Two things came together. First, a gold strike in the 1920’s was made at Red Lake, Ontario northwest of Dryden. With no roads, aircraft became the best means of access. Water was the preferred surface with aircraft on floats in the “open season” and skis when the Lake was frozen. The demand for air service spurred the rise of commercial aviation in Manitoba and North Western Ontario. The second was the hobby and interest in those early aircraft and their pilots of one Winnipeg based entrepreneur.		You could say the development of an aviation industry occurred by happenstance. Two things came together. First, a gold strike in the 1920’s was made at Red Lake, Ontario northwest of Dryden. With no roads, aircraft became the best means of access. Water was the preferred surface with aircraft on floats in the “open season” and skis when the Lake was frozen. The demand for air service spurred the rise of commercial aviation in Manitoba and North Western Ontario. The second was the hobby and interest in those early aircraft and their pilots of one Winnipeg based entrepreneur.


	The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.		The gold rush created the need and the profit potential for aircraft to fly men and machines to Red Lake. This was the economic incentive that led James A Richardson to get involved with commercial aviation. In 1926 he founded Western Canadian Airways (WCA) initially focused on Red Lake. However, over the next few years WCA helped open up the mineral mining development of the North with their air transport routes. Richardson then amalgamated Western Canada Airways with five eastern air services in 1930 to form Canadian Airways Limited (CAL) CAL operated through the 'Dirty Thirties' and into the 40s, delivering passengers and cargo to northern communities and outposts. In 1942, the Richardson family gave in to federal government pressure and interference in commercial aviation (with the government owned Trans-Canada Airlines) and sold CAL.
	[[File:Richardson_ja.jpg \|frame\|right\|200px\|J.A. Richardson]]		[[File:Richardson_ja.jpg \|frame\|right\|200px\|J.A. Richardson]]
Line 10:		Line 9:
	Back in 1926 Richardson found that the most suitable aircraft for the type of work was the Fokker Universal, as it was readily convertible from wheels to skis and to floats in the open-water season. These aircraft were flown by an assortment of pilots who became legendary bush pilots. Punch Dickins (see panel), Wop May, Ray Brown and others were opening up new routes and from time to time damaging their machines. Winnipeg was the closest city and the float planes would land on the Red River at the Brandon Avenue base. (in 2011 it is the site of the Redboine Boat Club). One of the regular visitors to watch the aircraft and talk to the pilots at Brandon Avenue was Grant MacDonald.		Back in 1926 Richardson found that the most suitable aircraft for the type of work was the Fokker Universal, as it was readily convertible from wheels to skis and to floats in the open-water season. These aircraft were flown by an assortment of pilots who became legendary bush pilots. Punch Dickins (see panel), Wop May, Ray Brown and others were opening up new routes and from time to time damaging their machines. Winnipeg was the closest city and the float planes would land on the Red River at the Brandon Avenue base. (in 2011 it is the site of the Redboine Boat Club). One of the regular visitors to watch the aircraft and talk to the pilots at Brandon Avenue was Grant MacDonald.

	:'''Punch Dickins trained as an engineer'''		{\| class="wikitable"
			\|-
			! '''Punch Dickins trained as an engineer'''
			\|-
			\| Punch Dickins is still a legend in the Arctic; flying more than 1,000,000 miles across the uncharted North. He invariably used dead reckoning and hand-drawn maps to plot his way across the north of Canada.

			What is less well known is that Punch was a Manitoban, born in Portage La Prairie, and he enrolled in mechanical engineering at the University of Alberta.
			He quit to enlist as an infantryman in the Canadian Army. While in Europe he transferred to the Royal Flying Corps. Punch became a bomber pilot and emerged from the war as a skilled and able pilot. Leaving the military for civil aviation, he was one of the first pilots to join Western Canadian Airways, operating in Manitoba and Northern Ontario. He flew the first aircraft on the prairie airmail circuit of Winnipeg, Regina, Calgary, Edmonton, Saskatoon, and Winnipeg.

	:Punch Dickins is still a legend in the Arctic; flying more than 1,000,000 miles across the uncharted North. He invariably used dead reckoning and hand-drawn maps to plot his way across the north of Canada.

	~~:What is less well known is that Punch was a Manitoban, born in Portage La Prairie, and he enrolled in mechanical engineering at the University of Alberta.~~
	:He quit to enlist as an infantryman in the Canadian Army. While in Europe he transferred to the Royal Flying Corps. Punch became a bomber pilot and emerged from the war as a skilled and able pilot. Leaving the military for civil aviation, he was one of the first pilots to join Western Canadian Airways, operating in Manitoba and Northern Ontario. He flew the first aircraft on the prairie airmail circuit of Winnipeg, Regina, Calgary, Edmonton, Saskatoon, and Winnipeg.

			\|}
	It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.		It was Grant’s interest in aviation that sparked the creation of MacDonald Brothers Aircraft Ltd. in 1930. The pilots would fly into Winnipeg and Grant made friends with many of them. Once the pilots knew Grant was involved with a sheet metal shop they asked him to carry out repairs. Quickly MacDonald became aware of aircraft maintenance issues and Grant arranged to repair the floats they used for water landings.

Abrawerman at 23:52, 9 September 2013

2013-09-09T23:52:15Z

← Older revision		Revision as of 18:52, 9 September 2013
Line 29:		Line 29:
	:In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.		:In 1923 Anthony Fokker had founded the Atlantic Aircraft Corporation, a name that was :then changed to Fokker Aircraft Corp. of America. By the end of the twenties Fokker had :grown into the largest builder of aircraft in the world, with factories in the :Netherlands and the United States. The Universal was designed by another Dutchman – :Robert Noorduyn, and manufactured in New Jersey. USA.

	[[File:Fokker_Universal.jpg \|\|right\|~~300px~~\|Fokker Universal]]		[[File:Fokker_Universal.jpg \|\|right\|400px\|Fokker Universal]]

	The MacDonalds decided to separate the aircraft business from the sheet metal shop, so in 1930 MacDonald Brothers Aircraft Limited was formed. The new shop was on Robinson Street in Winnipeg’s North End. They also had some space at the Brandon Avenue base for fitting and installing repaired components. It was the beginning of an operation that would manufacture floats for aircraft of Western Canada Airways and become one of the world’s largest manufacturers of seaplane floats.		The MacDonalds decided to separate the aircraft business from the sheet metal shop, so in 1930 MacDonald Brothers Aircraft Limited was formed. The new shop was on Robinson Street in Winnipeg’s North End. They also had some space at the Brandon Avenue base for fitting and installing repaired components. It was the beginning of an operation that would manufacture floats for aircraft of Western Canada Airways and become one of the world’s largest manufacturers of seaplane floats.
Line 39:		Line 39:
	:Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.		:Few aircraft initially designed in 1933 are still flying. One is the Norseman. The :Norseman aircraft are known to have been registered and/or operated in 68 countries :throughout the world and also have been based and flown in the Arctic and on the :Antarctic continent. The last Norseman built was sold and delivered to a commercial :customer on January 19, 1959. A total of 903 Norseman were built and, even today, :approximately 18 Norseman are still plying their trade in Canada and elsewhere, as the :visible embodiment of the design genius of Robert Noorduyn.

	[[File:Noorduyn_Norseman.jpg \|right\|~~200px~~\|Noorduyn Norseman]]		[[File:Noorduyn_Norseman.jpg \|right\|500px\|Noorduyn Norseman]]

	In these pre World War II days MacDonald Brothers also started a relationship with the Royal Canadian Air Force (RCAF) which was to be the foundation for the massive expansion in the war effort that followed. Pre-1936 the RCAF was responsible for overseeing the airworthiness of all aircraft both military and civilian. Hence a close liaison developed between the RCAF inspectors and MacDonald brothers. The plant overhauled RCAF Avro Avian and the ubiquitous Tiger Moth.		In these pre World War II days MacDonald Brothers also started a relationship with the Royal Canadian Air Force (RCAF) which was to be the foundation for the massive expansion in the war effort that followed. Pre-1936 the RCAF was responsible for overseeing the airworthiness of all aircraft both military and civilian. Hence a close liaison developed between the RCAF inspectors and MacDonald brothers. The plant overhauled RCAF Avro Avian and the ubiquitous Tiger Moth.